🌬️✨ Our Balloons Stay Beautiful Longer

🌬️✨ Our Balloons Stay Beautiful Longer

🌀 Factors that affect oxidation:

  • Temperature
  • Humidity
  • Airflow
  • Ultraviolet (UV) exposure
  • Geographic location and seasonal climate

🌡️ Temperature & Condition Breakdown

✅ Indoor – Below 24°C

  • Balloons can maintain their shape for 2–3 days with minimal oxidation.
  • After 3 days, a mild cloudy appearance may begin.
  • Balloons may last 5–10 days indoors.

✅ Outdoor – Below 24°C (Not under direct sunlight)

  • Balloons stay mostly intact for 1 full day.
  • Oxidation begins on Day 2, with color and shape changes.
  • Lifespan: 3–5 days (if not exposed to direct sun).
  • ⚠️ Direct sunlight may cause self-bursting based on UV strength.

⚠️ 24–30°C | Indoor (poor ventilation)

  • Balloons begin slight oxidation after 1–2 days.
  • By Day 3, visible oxidation appears.
  • Lifespan: 3–5 days indoors.

⚠️ 24–30°C | Outdoor (no direct sun)

  • Balloons begin to oxidize within half a day.
  • Lifespan: 1–2 days only.
  • ⚠️ With direct sunlight, balloons may self-burst due to high UV.

🔥 Above 30°C | Indoor

  • Oxidation starts within 1 day.
  • Lifespan: 2–3 days even in indoor conditions.

🔥 Above 30°C | Outdoor (no direct sun)

  • Balloons start changing within 1–2 hours.
  • Lifespan: 0.5–1 day only.
  • ⚠️ Under direct sunlight, continuous self-bursting may occur depending on local UV levels.

Normally for outdoor weather above 28'c heat, we use 3 layer of balloons, which cost more than normal prices and last longer. However we will advise if it is worth your money for hot weather. (Normally we don't recommend)

🎨 Don’t worry, everyone — Hina’s Fleir is not your average stylist!

We go the extra mile to keep your balloons fresh, glossy, and photo-ready.

Unlike standard event setups that leave balloons to fade and oxidize, we apply a professional-grade balloon shine treatment as a final touch — making your balloons stay vibrant and elegant throughout your event (and even days after).




📸 Balloon Comparison: What a Difference One Day Makes!

🟥 Left Photo: Ordinary Balloon – No Shine Treatment

  • Taken 1 day after inflation
  • Notice the oxidation and matte, dull finish
  • This is what happens naturally with untreated balloons over time

🟥 Right Photo: Hina’s Fleir Balloon – With Shine Treatment

  • Also taken 1 day after inflation
  • Still glossy, smooth, and picture-perfect
  • Treated with our signature final step: balloon gloss spray
  • Helps extend visual freshness and adds an elegant, professional look

💡 Why It Matters for Us:

We know you're investing in memories — not just materials.
That’s why at Hina’s Fleir, we care about the finish, not just the setup.

So you can enjoy your event worry-free, knowing your balloons will look just as magical in person as they do in photos.

💡 Please note: These are general guidelines based on testing and experience across climates. Results may vary based on humidity, location, and time of day.

Back to blog